home *** CD-ROM | disk | FTP | other *** search
/ MacHome 2001 June / MacHome Magazine Demo Disc June 2001.iso / Stuff / Software / Network / CoMa Mac 5.4.0 / Documentation / Handbook / Handbook.rsrc / TEXT_162.txt < prev    next >
Encoding:
Text File  |  2001-02-15  |  2.0 KB  |  64 lines

  1. ¬†3.9 Remote calling of the answering machine
  2.  
  3.  
  4. As is possible in many answering machines you can listen to your messages remotely as well. You will need for this either a tone dialling telephone or a portable tone dialler. CoMa Voice offers you the possibility to change your answering text remotely via DMTF tones.
  5.  
  6. Call your telephone number and wait till the answering machine starts with the text. Enter your PIN, press every key for approx 1 second.
  7.  
  8. The answering machine will then start to play the number of incoming voice calls and faxes and play the messages  giving the time of call. Times are only given in full hours (minutes are not used).
  9.  
  10.  
  11.  
  12.  
  13.  
  14.  
  15.  
  16.  
  17.         Omitting time announcements
  18.  
  19. If you do not want to listen to the time announcement (and therefore expensive) messages activate the button "No time announces" in the dialogue box preferences "Messages". Now you only hear the recorded messages. 
  20.  
  21. Make sure that the PIN starts with 8! No number is allowed to be used twice consecutively.
  22.  
  23.  
  24.  
  25.  
  26.  
  27.  
  28.  
  29.  
  30.  
  31.             Functions of remote calling
  32.  
  33.     Taste                            Funktion                                           
  34.  
  35.     *                    interrupt message, jump to next call
  36.  
  37.     1                    back to the start of the message
  38.  
  39.     2                    rewind 10 seconds
  40.  
  41.     3                    wind forward 10 seconds
  42.  
  43.     4                    jump one call back
  44.  
  45.     6                    send fax
  46.  
  47.     7                    record new answering text
  48.  
  49.     8                    finish recording and play this new message
  50.  
  51.     0                    reset "always" button of dialogue box
  52.  
  53.  
  54.  
  55.         Change text of answering machine via remote call
  56.  
  57. The answering text you record via a remote call will always be saved with the name NEW_OGM.XXX (XXX stands for the extension that indicates the file format) and put in the slot "Always". This text will be used till you switch off the button "always" again. You can do this remote as well (DTMF key 0, remind it works ony if you are in remote call mode!).
  58.  
  59. After recording you can listen to the text again and check it by pressing key 8. If you do not like the recording press key 7 to get into recording mode again.
  60.  
  61.   
  62.  
  63.  
  64.